An anti-cheat device that is not functioning correctly provides no protection. This quality control checklist helps you verify that your devices are working as intended.
Visual Verification
1. Confirm the status light is steady green. Flashing or off lights indicate a problem.
2. Check that the power adapter is securely connected to both the device and the wall outlet.
3. Inspect the device for physical damage, cracks, or signs of water or dust ingress.
4. Verify that the device has not been moved from its original installation position.
Functional Verification
5. Review the device event log. An empty log after days of operation may indicate the device is not detecting signals.
6. If you have a known test signal source, activate it near the device and verify the device logs the event.
7. Check that the device clock is accurate. An incorrect clock means event timestamps are unreliable.
8. Compare the device log against a known cheating incident. If the device did not log the incident, it may not be functioning correctly.
Documentation
9. Record the verification date and results in your maintenance log.
10. If the device fails any verification step, contact manufacturer support for troubleshooting or replacement.
11. Replace or repair any devices that fail verification immediately. An unprotected machine is a target.
12. Schedule the next quality control check based on the manufacturer’s recommended interval.
If your arcade machine is showing signs of product issues, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.