Fish tables are the most commonly cheated machine type in arcades, and the methods used against them are well-documented. Understanding each method helps operators choose the right countermeasure. Here is how each cheating method works and which device stops it.
Method 1: Signal Injection (Wireless Jammer)
The cheater uses a small device — often the size of a phone charger — that broadcasts a signal on the same frequency as the fish table’s internal communication system. The machine board receives this signal and interprets it as a legitimate payout command. The machine pays out credits or triggers a bonus event. The player collects the winnings and leaves. Stopped by: Gen2 anti-cheat device, which blocks signals in the 300-2400 MHz range.
Method 2: Trojan Code (Diagnostic Menu Access)
The cheater enters a password sequence through the touchscreen — a sequence of taps in specific positions and timing. The sequence opens the machine’s hidden diagnostic menu. From the menu, the cheater can adjust payout percentages, trigger free credits, or award jackpots. Stopped by: AI Trojan Terminator, which recognizes diagnostic access patterns and blocks them.
Method 3: Wire-Tap Attack (Data Line Interception)
The cheater attaches a small device to the communication bus that connects the coin mech, payout controller, and main board. The tap device intercepts or injects data on this bus, either reading payout commands to predict outcomes or injecting fake payout commands to trigger false wins. Stopped by: Gen2 anti-cheat device, which monitors the bus for impedance changes and unauthorized signals.
Method 4: Point Stealing (Fake Coin Pulse)
The cheater uses a small electronic device that generates a pulse that mimics the signal a real coin produces when it passes through the coin mech. The machine registers a credit as if a coin was inserted. The cheater gets free play without paying. Stopped by: Gen2 coin mech monitor, which validates the electrical signature of each coin pulse.
If your fish table is showing signs of any of the four common cheating methods, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session.
Frequently Asked Questions
Q: Which cheating method is most common on fish tables?
A: Signal injection accounts for approximately 40% of fish table cheating incidents, followed by trojan codes at 30%, wire-tap attacks at 20%, and point stealing at 10%.
Q: Can one device stop all four methods?
A: The Gen2 device covers signal injection, wire-tap attacks, and point stealing. The AI Trojan Terminator covers trojan codes. Both devices are needed for complete protection.
Q: How do cheaters obtain the equipment for these methods?
A: Signal injectors and pulse generators are sold openly on online marketplaces labeled as ‘testers’ or ‘maintenance tools.’ Trojan codes are shared in private forums and chat groups.
Q: Are there any fish table models that are immune to these methods?
A: No commercially available fish table model is immune to all four methods. The vulnerability is inherent in how the machines communicate electronically.