A Filipino arcade stopped EMP jammer attacks overnight after installing Gen2 protection. This case study covers how the attacks were discovered and stopped.
The Situation
A Filipino arcade with 16 fish tables was experiencing intermittent payout spikes on four machines. The owner assumed it was a power supply issue because the problem came and went unpredictably. He replaced power supplies on all four machines at a cost of $800. The problem returned within a week.
A technician friend suggested testing for EMP interference. Using a basic RF detector, they confirmed that brief electromagnetic pulses were occurring near the affected machines during operating hours.
The Solution
We installed Gen2 devices on all 16 machines. The devices began detecting and blocking EMP pulses immediately. In the first week, the devices logged 47 blocked EMP events. The owner had no idea he was under that level of attack.
The Results
The payout spikes stopped immediately. Revenue on the four affected machines returned to normal within days. The owner calculated that he had been losing approximately $3,200 per month to EMP attacks before protection was installed. The devices paid for themselves within six weeks.
Key Takeaway
EMP attacks are impossible to detect without continuous monitoring equipment. Standard RF detectors that sample periodically miss the microsecond-long pulses entirely. Only devices with true continuous monitoring can detect and block EMP cheating.
If your fish table is showing signs of EMP jamming, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.