Fish hunter machines require regular maintenance to stay profitable and cheat-resistant. Neglected machines develop vulnerabilities that cheaters exploit. These maintenance tips focus specifically on cheat prevention during your regular service routine.
Inspect Cable Connections Monthly
The most common point of entry for signal injection devices is the coin mech cable. Inspect all cable connections monthly. Look for extra devices clipped onto cables, unusual tape or wrappings, or cables that appear to have been disconnected and reconnected.
Clean and Test Coin Mechs Regularly
A dirty or malfunctioning coin mech can cause the machine to register incorrect coin counts, creating a payout discrepancy that looks like cheating. Clean coin mechs monthly and test them with known coin quantities to verify accuracy.
Check Anti-Cheat Device Position
Devices that have been bumped or moved during cleaning may no longer be positioned correctly. Check that all anti-cheat devices are within the specified coverage range of their target machines. Reposition any devices that have shifted.
Verify Device Status Lights
During routine maintenance, check the status light on every anti-cheat device. A missing or non-functioning light means the device is not protecting. Replace or repair non-functioning devices immediately.
Update the Device Installation Log
If devices were moved, machines were rearranged, or new machines were added, update your device installation log. An accurate log helps you track coverage, plan expansions, and diagnose coverage gaps.
If your fish table is showing signs of cheating vulnerabilities, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.