Installing a fish table anti-cheat device is simpler than most operators expect. This step-by-step guide covers the entire process from unboxing to verification, with no technical knowledge required.
Step 1: Unbox the Device
Open the package and confirm you have the device unit, power adapter, and quick-start guide. Inspect the device for any shipping damage. If everything looks good, proceed to step 2.
Step 2: Choose the Location
Place the device within 3 meters of the fish table you want to protect. The Gen2 covers a 2.5-3 meter radius. You can place it on top of the machine, on a nearby shelf, or mounted to the cabinet side. The device works in any orientation.
Step 3: Connect Power
Plug the power adapter into the device, then plug the adapter into a standard wall outlet. The device will power on and begin its startup sequence. Wait 30 seconds for the startup to complete.
Step 4: Verify Protection
Check the status light. A steady green light means the device is active and protecting. If the light is flashing or off, check the power connection and try a different outlet. Contact support if the issue persists.
Step 5: Log the Installation
Record the device serial number, installation date, and machine location in your equipment log. This information is useful for warranty claims and future troubleshooting.
If your fish table is showing signs of installation process, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.