When machines are cheated, some operators consider rebuilding them rather than installing protection. This guide compares rebuilding vs. anti-cheat devices.
The Rebuilding Approach
Rebuilding cheated machines involves replacing motherboards, rewiring communication lines, and reinstalling firmware. The cost ranges from $200-$800 per machine depending on the extent of the damage. The problem is that rebuilding does not prevent the same cheating from recurring. The machine is restored to its original vulnerable state.
The Anti-Cheat Approach
Installing anti-cheat protection costs less than most motherboard replacements and prevents future attacks. The device pays for itself within weeks and provides ongoing protection. No rebuilding required.
Cost Comparison
A single motherboard replacement costs more than a Gen2 device. If the cheating continues after the replacement, the operator pays for additional troubleshooting and repairs. Anti-cheat protection is a one-time cost that prevents future losses.
Recommendation
If a machine has been physically damaged by a cheating device (burned components, cut wires), replace the damaged parts. Then install anti-cheat protection to prevent the same attack from happening again. Do not rebuild without protecting.
If your arcade machine is showing signs of rebuilt machine alternative, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.