Detecting EMP jammer attacks on your fish tables requires systematic monitoring. This 5-step process helps you confirm whether EMP attacks are affecting your machines.
Step 1: Identify Suspect Machines
Review your payout logs for machines showing intermittent payout spikes. EMP attacks produce a start-stop pattern rather than consistent anomalies. Machines that show normal operation punctuated by bursts of unexplained payouts are candidates for EMP investigation.
Step 2: Install Continuous Monitoring
Install a Gen2 device on the suspect machine. The Gen2 monitors the electromagnetic environment continuously, unlike periodic RF scanners that miss brief EMP pulses. Run the device for 7 days.
Step 3: Review the Event Log
After 7 days, review the Gen2 event log. Look for entries indicating EMP detection. Each entry includes a timestamp. Correlate these timestamps with your payout records. If EMP detections correlate with payout spikes, you have confirmed EMP attacks.
Step 4: Identify the Source
If EMP attacks are confirmed, try to identify the source. Check if the attacks occur at consistent times. Review camera footage from those times. If possible, use a directional RF detector to locate the source of the pulses.
Step 5: Implement Protection
Once confirmed, keep the Gen2 device on the affected machine permanently. The device will continue to detect and block EMP pulses. If multiple machines are affected, add Gen2 devices to cover the full floor.
If your fish table is showing signs of EMP jamming, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.