The biggest barrier to anti-cheat adoption is the fear that installation will damage machines or void warranties. This guide covers how to install anti-cheat devices without modifying your machines in any way.
Plug-and-Play Installation
The Gen1 and Gen2 devices require no machine modification. You place the device near the target machine and plug it into a standard power outlet. That is the entire installation. The device never touches the machine’s internal components, wiring, or firmware. There is no risk of electrical damage, voided warranties, or configuration errors.
Inline Installation for Specialized Devices
The V5 and K8 devices connect inline with the existing communication cable between the machine and its ticket dispenser. This requires opening the cabinet, but the connection uses standard cables and connectors. No soldering, no wire cutting, no board modification. The original cable can be restored in seconds by disconnecting the device.
Common Installation Mistakes to Avoid
Placing the device too far from the target machine reduces coverage effectiveness. A Gen2 needs to be within 3 meters of the machine it protects. Also, do not block the device with metal enclosures or place it inside a metal cabinet, as this significantly reduces detection range.
If your arcade machine is showing signs of installation concerns, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.