Installing a V5 anti-theft dog device on your top ball machine is a straightforward process. This 4-step guide covers everything you need to do.
Step 1: Identify the Communication Cable
Open the machine cabinet and locate the cable connecting the machine to its ticket dispenser. This is typically a ribbon cable or multi-wire harness with a standard connector at each end. Consult your machine manual if you are unsure which cable to use.
Step 2: Power Off the Machine
Turn off the machine and unplug it from the wall. This prevents any electrical issues while you connect the device. Wait 30 seconds for the machine’s internal capacitors to discharge.
Step 3: Connect the V5 Device
Disconnect the existing cable at the connector point nearest to the ticket dispenser. Connect the V5 device inline using the provided cables. The connectors are keyed and can only be connected one way. Route the cables to avoid pinching or sharp bends.
Step 4: Power On and Verify
Plug the machine back in and power it on. Check the V5 status light. A green light indicates the device is active. Test the ticket dispenser by dispensing a known ticket. If the dispenser operates normally and the V5 light is green, installation is complete.
If your top ball machine is showing signs of data leakage, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.