Over 14 years of field work, I have cataloged dozens of devices designed specifically to cheat fish table arcade machines. Some are sophisticated and expensive. Most are surprisingly simple and cheap. This list covers the 15 most common cheating tools and how to block each one.
Signal-Based Tools
1. Single-Frequency Jammer: Broadcasts a continuous signal on one frequency. Blocks with a Gen2 device that covers the full 300-2400MHz range.
2. Multi-Frequency Jammer: Sweeps across frequency ranges to find the target frequency. Blocks with a Gen2 device that monitors all frequencies simultaneously.
3. EMP Pulse Generator: Fires brief high-voltage pulses. Blocks with a Gen2 device that detects and isolates the motherboard during pulse events.
4. Signal Injector: Clips onto the coin mech cable and sends fake coin pulses. Blocks with a Gen1 or Gen2 coin mech pathway monitor.
5. Bluetooth Spoofer: Mimics Bluetooth peripheral signals. Blocks with a Gen2 device covering 2.4GHz Bluetooth frequencies.
Physical Access Tools
6. Wire-Tap Clip: Attaches to internal ribbon cables to read data. Blocks with a V5 or K8 inline data monitor that detects unauthorized access.
7. USB Data Harvester: Plugs into diagnostic USB ports to extract data. Blocks by physically securing USB ports and using inline data monitoring.
8. Key Copy Set: Used to open cabinets and access internal components. Prevented by upgrading to high-security or keyed-different locks.
9. Pick Tool Set: Used to bypass cabinet locks without a key. Prevented by using high-security locks with anti-pick features.
Software-Based Tools
10. Cheat Code Database: A collection of test mode sequences for various machine models. Blocks with a Gen1 device that monitors button panel inputs.
11. Firmware Dumper: Reads machine firmware to extract trojan code triggers. Blocks with physical access controls and AI Trojan Terminator.
12. Remote Access Tool: Connects to networked management systems. Prevented by changing default passwords and network segmentation.
Physical Manipulation Tools
13. Retrieval Wire: A thin wire used to retrieve coins from the payout tray. Prevented by tray design modifications and staff monitoring.
14. Magnet Set: Used to manipulate coin mech sensors or prize mechanisms. Prevented by staff training and cabinet design.
15. Prize Sensor Trigger: A tool that mimics the paper path sensor to trigger ticket dispenses. Prevented by tamper-evident seals on sensor access points.
If your fish table is showing signs of common cheating tools, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.