You bought your first anti-cheat device. It arrived in the mail. Now what? If you have never installed one before, the process can seem intimidating. It should not be. This walkthrough covers exactly what to do from unboxing to verification.
Step 1: Unbox and Inspect
Open the package. You should find the device unit, a power adapter, and a quick-start guide. Check for any visible shipping damage. If everything looks good, move to step 2.
Step 2: Choose the Location
Place the device within 3 meters of the machine you want to protect. The Gen2 covers a 2.5-3 meter radius, so placement within that range is sufficient. You can put it on top of the machine, on a nearby shelf, or mounted to the cabinet side. The device works in any orientation.
Step 3: Plug It In
Connect the power adapter to the device and plug it into a standard wall outlet. That is the entire installation process. There is no step 4.
Step 4: Verify It Is Working
Check the indicator light. A steady green light means the device is active and protecting. Some models may show a brief startup sequence before the green light appears. Wait 30 seconds. If the light is green, you are protected.
What to Do in the First Week
Check the device log after 7 days. The log will show how many signals were blocked. If the number surprises you, that is normal. Most operators are shocked by how many cheating attempts were happening without their knowledge.
If your fish table is showing signs of installation concerns, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.