This is the most common concern I hear from operators who are considering anti-cheat protection for the first time. They have invested thousands in their machines, and the last thing they want is to damage them with an add-on device. The short answer: a properly designed plug-and-play anti-cheat device will not damage your machine. Let me walk through the specific concerns and address each one.
Will It Void My Machine Warranty?
A plug-and-play device that requires no modification to the machine does not void any warranty. You are not opening the cabinet, touching the motherboard, altering the wiring, or changing the firmware. The device is placed near the machine and connected to its own power source. It never touches the original equipment. If you are still concerned, check with your machine manufacturer, but there is no physical or electronic change to their product.
Can It Electrically Damage the Motherboard?
The Gen1 and Gen2 devices are passive monitors. They do not send any electrical signals into the machine. They listen to the ambient RF environment and block unauthorized signals by filtering them, not by injecting anything into the machine’s circuits. There is no pathway for electrical damage from the device to your motherboard.
I have tested Gen2 devices on over 200 machines across 15 countries. In that entire deployment history, there has been zero instances of electrical damage caused by the device. The only damage I have seen has been from cheaters — signal injection devices that overload the machine’s input circuits — which is exactly what the anti-cheat device prevents.
Does the Device Heat Up or Create Fire Risk?
The device draws minimal power — comparable to a phone charger. It generates negligible heat and contains no batteries or flammable materials. The power adapter is a standard UL-certified unit with over-current protection. The device itself has no moving parts and no components that can overheat under normal operating conditions. If the device fails, it fails silently and safely.
Can It Interfere with Other Machines Nearby?
No. The device is a receiver, not a transmitter. It monitors signals but does not broadcast any of its own. Unlike a jammer, which actively transmits to overpower cheating signals, the Gen2 and Gen1 devices block attacks through passive filtering. They cannot interfere with other machines because they do not emit anything.
This is a common confusion. Some operators assume that because a jammer broadcasts a signal to block cheating, an anti-cheat device must also broadcast. The opposite is true. A jammer attacks your machine. An anti-cheat device protects it. They operate on completely different principles.
What If I Install It Incorrectly?
The installation process has two steps: place the device and plug in the power. There is no incorrect way to do either. The device works regardless of orientation, proximity to metal surfaces, or position relative to the machine. If the indicator light is on, the device is protecting. There is no configuration to get wrong.
If your arcade machine is showing signs of installation concerns, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.