Claw machines seem simple, but their internal electronics create vulnerabilities that cheaters exploit through specific button combinations and switch sequences. These 11 cheat codes are among the most common I have encountered across different claw machine models. Understanding them helps you protect your machines, even if you do not have anti-cheat hardware yet.
Factory Test Mode Codes
1. Service Menu Access: A sequence that opens the machine’s service menu, where the cheater can adjust claw strength, timer settings, and prize release frequency without a key.
2. Free Play Mode: A code that puts the machine into free play mode, allowing unlimited attempts without payment. Often accessed through the service menu.
3. Prize Release Override: A code that triggers an immediate prize release bypassing the claw mechanism. Common in machines where the release is controlled by a software command rather than a physical sensor.
4. Diagnostic Mode: A code that activates the machine’s diagnostic mode, which cycles through all mechanical functions. The cheater can trigger the claw drop mechanism during this cycle.
Timing Bypass Codes
5. Timer Reset: A code that resets the claw grab timer, allowing the player unlimited grab time. Usually requires entering a code before the timer expires.
6. Restart Without Payment: A code that restarts the game cycle without requiring a coin drop. The machine runs through the game, and the cheater gets a free attempt.
7. Difficulty Adjustment: A code that reduces or eliminates the claw strength randomization, making every grab as strong as possible. The cheater wins on virtually every attempt.
Hardware Bypass Codes
8. Credit Addition: A code that adds free credits without a coin insertion. Common in machines where the credit system is software-controlled.
9. Sensor Bypass: A code that disables the prize detection sensor, allowing the machine to register a win even when no prize was dispensed.
10. Debug Menu Access: A code that opens a hidden debug menu with advanced settings including payout statistics, error logs, and system tests.
11. Reset to Factory Defaults: A code that resets the machine to factory defaults, overwriting any custom settings the operator configured. The cheater then plays against default difficulty settings.
If your claw machine is showing signs of cheat code or trick attacks, send me a message with your machine model and a photo of your setup. I will do a quick remote check for free. Every device comes with a money-back guarantee, official invoice, express shipping, and 1-on-1 technical support.
WhatsApp / WeChat / Phone: +86 158 1582 1587 — Engineer Wang
To discuss the best anti-cheat strategy for your specific arcade setup, message me directly. I offer a free remote diagnostic session — send me your machine model and I will tell you what is going on.